Enhanced thermal conductivity oxide nuclear fuels by co-sintering with BeO: II. Fuel performance and neutronics

The fuel rod performance and neutronics of enhanced thermal conductivity oxide (ECO) nuclear fuel with BeO have been compared to those of standard UO₂ fuel. The standards of comparison were that the ECO fuel should have the same infinite neutron-multiplication factor k_inf at end of life and provide the same energy extraction per fuel assembly over its lifetime. The BeO displaces some uranium, so equivalence with standard UO₂ fuel was obtained by increasing the burnup and slightly increasing the enrichment. The COPERNIC fuel rod performance code was adapted to account for the effect of BeO on thermal properties. The materials considered were standard UO₂, UO₂ with 4.0 vol.% BeO, and UO₂ with 9.6 vol.% BeO. The smaller amount of BeO was assumed to provide increases in thermal conductivity of 0, 5, or 10%, whereas the larger amount was assumed to provide an increase of 50%. A significant improvement in performance was seen, as evidenced by reduced temperatures, internal rod pressures, and fission gas release, even with modest (5-10%) increases in thermal conductivity. The benefits increased monotonically with increasing thermal conductivity. Improvements in LOCA initialization performance were also seen. A neutronic calculation considered a transition from standard UO₂ fuel to ECO fuel. The calculation indicated that only a small increase in enrichment is required to maintain the k_inf at end of life. The smallness of the change was attributed to the neutron-multiplication reaction of Be with fast neutrons and the moderating effect of BeO. Adoption of ECO fuel was predicted to provide a net reduction in uranium cost. Requirements for industrial hygiene were found to be comparable to those for processing of UO₂.     

Near-Field Electron Energy Loss Spectroscopy in Porous Silicon

First results of an Electron Energy Loss Spectroscopy in the Near Field (NFEELS) mode of n⁺ porous silicon are described here. Sequences of EELS spectra in the low loss energy range (0–30 eV) were recorded, using a scanning transmission electron microscope, as the e-beam was scanned across a nano-hole surrounded by Si platelets. This technique is shown to be very sensitive to spectral and spatial changes in the electromagnetic field distribution outside the surface of nanoparticles, governed by their local nature and shape.     

The invasion of a large lake by the Eurasian genotype of common reed: The influence of roads and residential construction

The Eurasian genotype of common reed (Phragmites australis) is one of the most aggressive plant invading North American wetlands. There is, however, little published evidence on establishment patterns of populations along lakes of the St. Lawrence River–Great Lakes watershed. We tested the hypothesis that the recent invasion of Great Lake Saint-François (Québec, Canada) by common reed was facilitated by a dense road system and by an intense residence construction activity along lakeshores. A total of 345 and 2914 reed stands were mapped along lakeshores, and along the road system of the study area, respectively. The probability of finding a reed stand on a lakeshore increases with the proximity of the lake's outlet, and of a paved road, but decreases with the proximity of a residence built since 1990. It is likely that common reed first spread along the road system, and that wind dispersal of seeds then favored the establishment of populations on lakeshores. Our model does not support the hypothesis that residential construction facilitated the establishment of reed stands, probably because the recent residential construction boom occurred essentially in the southern part of the lake, where the number of roadside reed populations is much lower than in the northern part (lower seed rain). The invasion of Great Lake Saint-François shows that the spread of the plant is not restricted to major river or road systems. Large or small lakes, if submitted to intense diaspore pressure, can also be at risk.     

Tailoring Dielectric Properties of Multilayer Composites Using Spark Plasma Sintering

A straightforward and simple way to produce well-densified ferroelectric ceramic composites with a full control of both architecture and properties using spark plasma sintering (SPS) is proposed. SPS main outcome is indeed to obtain high densification at relatively low temperatures and short treatment times thus limiting interdiffusion in multimaterials. Ferroelectric/dielectric (BST64/MgO/BST64) multilayer ceramic densified at 97% was obtained, with unmodified Curie temperature, a stack dielectric constant reaching 600, and dielectric losses dropping down to 0.5%, at room-temperature. This result ascertains SPS as a relevant tool for the design of functional materials with tailored properties.     

The catalysis of the Ruff oxidative degradation of aldonic acids by titanium‐containing zeolites

Ti‐BEA and Ti‐FAU, obtained by post‐synthesis treatment, and TS‐1, obtained by direct hydrothermal synthesis, have been tested as catalysts for the Ruff oxidative degradation of calcium d‐gluconate to d‐arabinose using diluted hydrogen peroxide as oxidant. Only large‐pore zeolites Ti‐BEA and Ti‐FAU were found to be active. It was shown, in particular, that a very rapid leaching of titanium occurred and that the titanium species present in the solution were responsible for the catalytic activity observed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Hypoglycaemia‐free artificial pancreas project

Driving blood glycaemia from hyperglycaemia to euglycaemia as fast as possible while avoiding hypoglycaemia is a major problem for decades for type‐1 diabetes and is solved in this study. A control algorithm is designed that guaranties hypoglycaemia avoidance for the first time both from the theory of positive systems point of view and from the most pragmatic clinical practice. The solution consists of a state feedback control law that computes the required hyperglycaemia correction bolus in real‐time to safely steer glycaemia to the target. A rigorous proof is given that shows that the control‐law respects the positivity of the control and of the glucose concentration error: as a result, no hypoglycaemic episode occurs. The so‐called hypo‐free strategy control is tested with all the UVA/Padova T1DM simulator patients (i.e. ten adults, ten adolescents, and ten children) during a fasting‐night scenario and in a hybrid closed‐loop scenario including three meals. The theoretical results are assessed by the simulations on a large cohort of virtual patients and encourage clinical trials.Inspec keywords: biochemistry, medical control systems, blood, diseases, medical computing, closed loop systems, biomedical equipment, state feedback, patient treatment, patient monitoring, biomedical measurement, physiological models, sugarOther keywords: fasting‐night scenario, hybrid closed‐loop scenario, hypoglycaemia‐free artificial pancreas project, blood glycaemia, euglycaemia, type‐1 diabetes, control algorithm, guaranties hypoglycaemia avoidance, pragmatic clinical practice, state feedback control law, required hyperglycaemia correction bolus, rigorous proof, control‐law, glucose concentration error, hypo‐free strategy control     

Silicon Substitution for Aluminum in Calcium Silicate Hydrates

²⁷Al MAS and multiquantum (MQ) MASNMR (magic-angle spinning nuclear magnetic resonance) spectroscopy were used to study the substitution of silicon by aluminum in calcium silicate hydrates (C-S-H), which are the main component of hydrated portland cement. Synthetic C-S-H samples were prepared, and their chemical stability was studied. Two-dimensional 3Q-MASNMR spectra revealed the chemical shift and quadrupolar parameters (delta_iso, nu_Q) that labeled aluminum sites in the C-S-H. Tetrahedral aluminum was observed in the bridging and nonbridging sites of the silicate chains.     

Measurement of thermal conductivity of polymer melts by the line-source method

An apparatus has been developed for the measurement of thermal conductivity of polymer melts. Based on the transient “line source method,” it is ideally suited to these materials because measurements can be made quickly, before the onset of thermal degradation. Also, little or no sample preparation is required. A number of commercial polymers have been tested, including some glass-fiber filled composites.     

Dogmatisme paternel, niveau socio-économique et performance cognitive de pré-adolescent(e)s.

Studied the association among paternal dogmatism, socioeconomic status (SES), and cognitive development using Piagetian tasks. Human subjects: 98 male and female French-Canadian schoolage children and adolescents (aged 144–171 mo) (1st class of students in the secondary school). 98 male French-Canadian adults (aged 32–62 yrs). All Ss were from 2-parent families and consisted of 50 father–daughter and 48 father–son dyads. Paternal dogmatism was measured using the French-Canadian version of the Rokeach Scale by M. Rokeach (1960). Cognitive levels were evaluated using Piaget and Inhelder"s Permutations Test (1951). Ss" SES was measured using B. R. Blishen and H. A. McRobert"s Socioeconomic Index (1976). The results of the cognitive performance tests were analyzed statistically according to age, sex, dogmatism, and SES, using an analysis of variance (ANOVA). (English abstract) (PsycINFO Database Record (c) 2010 APA, all rights reserved)